
Slurry seal in Portland and SW Washington
Blackline Inc. is the only slurry seal contractor in the Portland metro and SW Washington. We slurry seal commercial parking lots, HOA and private streets, and driveways across the region. A real wearing surface, not a thin coat of sealer.
Who does slurry seal in Portland?
Blackline Inc. is the only slurry seal contractor in the Portland metro and SW Washington. We slurry seal commercial parking lots, HOA and private streets, and driveways across the region. We have specialized in this work since 1987 — a real wearing surface, not a thin coat of sealer — and we will tell you whether slurry is the right treatment and quote the work.
We are licensed, insured, and bonded in Washington, Oregon, and Idaho. Our office is in Woodland, Washington. Quote requests go straight to Cody Lorenzen, President.

Is slurry seal right for my parking lot or HOA streets?
Slurry seal is a preventative treatment for asphalt that is still structurally sound. It is a mix of asphalt emulsion, aggregate, fillers, and water, placed with specialized slurry equipment to a laboratory mix design. It fills in lost fines and leaves a new, durable wearing surface.
It is often the right treatment when a parking lot or HOA street is faded, oxidized, or starting to ravel — the surface is wearing and losing aggregate — but the base is still sound and the pavement is not badly cracked.
Type I
Min. 1/8" wearing surfaceA finer mix, often used to protect newer lots and streets.
Type II
Min. 1/4" wearing surfaceOur most commonly used application. For pavement that has had some wear and a loss of matrix. It corrects moderate to severe raveling, oxidation, and loss of fines, and it provides a skid-resistant surface.
Type III
Min. 3/8" wearing surfaceA heavier application for moderate- to heavy-traffic asphalt and more severe raveling.
If the base has failed, or you have deep structural cracking, potholes, rutting, or drainage problems, those areas need repair or an overlay first. Slurry seal will not fix a failed base. If the pavement is too far gone, we will tell you that.
For a commercial lot, see slurry seal for commercial parking lots. For community streets, see slurry seal for HOAs and private streets. For driveways, see driveway slurry seal.
Slurry seal is not seal coat
They are not the same product, and they are not applied with the same equipment.
If you were quoted a cheap “seal coat” for a parking lot, HOA street, or driveway, ask whether it is actually slurry seal — mixed with aggregate, placed with a slurry machine, and built to a mix design. If it is not, you are not getting the same treatment. That is the work we have specialized in since 1987, and it is what cities and counties specify when they want to preserve asphalt the right way.

Seal coat
- A thin coating brushed or sprayed onto asphalt
- Can darken the surface for a while
- Not applied with slurry equipment
Slurry seal
- Asphalt emulsion, aggregate, fillers, and water
- Mixed on site in an automated machine to a laboratory mix design
- Fills in lost fines and leaves a new, durable wearing surface
- Type I, II, or III: a minimum of 1/8", 1/4", or 3/8" of new surface
What it costs, and how long it lasts
- $0.25–$0.75Per square foot, depending on size, quality of asphalt, and the prep work needed.
- 5–7+ yearsHow long our slurry seal lasts.
- 7 a.m. to 5 p.m.Typical closure during peak summer temperature. That is a same-day closure in those conditions. We will tell you what to expect for your job.
Tell us about the lot, the street, or the driveway — the city, a rough size if you have it, and a photo if you can — and we will follow up with a quote.
Office: (360) 225-1080
Email: Cody@blacklineinc.net
Who we’ve done this work for
Private and commercial customers include Safeway, Lowe’s, Walmart, Vancouver Mall, The Highlands HOA, Invest West Management, The Al Angelo Company, Linear Technology, and WaferTech. Project photos on our site include a Lowe’s parking lot in Vancouver and a Safeway parking lot in Vancouver (June 2018).
We’ve worked for the City of Vancouver and Clark County for more than 10 years, along with the surrounding cities. We worked for them again in 2025 and 2026, and in 2024 we were the contractor on the City of Vancouver’s Joint Agency Slurry Seal Project, placing slurry seal and other work on various roads in the City of Vancouver and Clark County.
See this project on our projects page →
Public agencies have trusted us for years as well, across Oregon, Washington, and Idaho.
Nearby agencies on that list include the City of Vancouver, WA; Clark County, WA; Washington County, OR; the City of Oregon City, OR; the City of Milwaukie, OR; the City of Hillsboro, OR; the City of Gresham, OR; and Pearson Field, Hillsboro Airport, and Troutdale Airport. The full list is on our projects and public agencies pages.
We have specialized in slurry seal since 1987. We are licensed, insured, and bonded in Washington, Oregon, and Idaho:
- Washington — BLACKI*135CP
- Oregon — CCB 66384
- Idaho — PWCL 009681-B-4
Where we work
For private parking lots, HOAs, and driveways, we serve the Portland metro and SW Washington. We also work with public agencies across Oregon, Washington, and Idaho.
Physical office
9605 Old Pacific Hwy
Woodland, WA 98674
Mailing
Blackline Inc.
P.O. Box 820648
Vancouver, WA 98682
Get a quote
Office: (360) 225-1080
Email: Cody@blacklineinc.net
Questions we hear often
Who does slurry seal in Portland?
Blackline Inc. is the only slurry seal contractor in the Portland metro and SW Washington. We slurry seal parking lots, HOA and private streets, and driveways across the region. We have specialized in slurry seal since 1987.
Is slurry seal the same as seal coat?
No. Seal coat is a thin coating brushed or sprayed onto asphalt. Slurry seal is a mixed wearing surface — emulsion, aggregate, fillers, and water — placed with specialized slurry equipment to a laboratory mix design.
My parking lot is faded and starting to ravel. Is slurry the right fix?
Often, yes, if the base is still sound and the pavement is not badly cracked. Type II slurry is used where the surface has had some wear and a loss of matrix; it corrects moderate to severe raveling, oxidation, and loss of fines. If the base has failed, those areas need repair or an overlay first. We will tell you which applies.
What does slurry seal cost?
Work is generally priced between $0.25 and $0.75 per square foot, depending on size, quality of asphalt, and the prep work needed. Call (360) 225-1080 or email Cody@blacklineinc.net for a quote.
How long does slurry seal last?
Our slurry seal lasts 5-7+ years.
How long will my lot or street be closed?
During peak summer temperature, typical closure is 7:00 a.m. to 5:00 p.m. That is a same-day closure in those conditions. We will tell you what to expect for your job.
Do you work on HOA and private streets?
Yes. We slurry seal community streets and private roads in the Portland metro and SW Washington, including work with The Highlands HOA and properties overseen by Invest West Management and The Al Angelo Company.
Do you slurry seal driveways?
Yes. We use the same slurry treatment used on public pavement, sized to the driveway, for homes in the Portland metro and SW Washington.
Do you work for the City of Vancouver and Clark County?
Yes, regularly. We’ve done work for the City of Vancouver and Clark County for more than 10 years, along with the surrounding cities, and it’s where we do a large share of our work. We worked for them again in 2025 and 2026, and in 2024 we were the contractor on the City of Vancouver’s Joint Agency Slurry Seal Project, placing slurry seal and other work on various roads in the City of Vancouver and Clark County.
Are you licensed in Oregon and Washington?
Yes. We are licensed, insured, and bonded in Washington, Oregon, and Idaho. WA Lic # BLACKI*135CP, OR CCB 66384, ID PWCL 009681-B-4.
- Since 1987Slurry seal specialists in the Northwest
- Licensed, insured & bondedIn Washington, Oregon, and Idaho
- Contractor licensesWA Lic # BLACKI*135CP · OR CCB 66384 · ID PWCL 009681-B-4
Get a quote
Tell us about the lot, the street, or the driveway in the Portland metro or SW Washington. We will follow up with you directly.
Licensed, insured, and bonded. Quote requests go straight to Cody Lorenzen, President. Also see commercial parking lots, HOAs and private streets, and driveways.